Nicelabel Software

In this particular situation, the client was using Zebra Z4M Plus printer and the printer driver from NiceLabel. It seems that the driver caused the printer to print random...

When creating a variant label in Nicelabel, the form that is created transforms the label design into a variant label that freezes or locks the data sources. This...

It appears the Nicelabel Web Client will create a local cache of documents used for printing from that client. If the Nicelabel solution running at print time cannot...

1. Start NiceLabel Designer program 2. From the File menu, select Options

Technical Specifications: http://support.efficientbi.com/wp-content/uploads/td_Technical_Specifications_2019.pdf....

With the multi-user license, you can install NiceLabel on an unlimited number of workstations...

NiceLabel manages printer counts against a license by looking at the printers listed in Windows Printers & scanners. With multiple workstations...

This message indicates that the settings entered into NiceLabel, for that printer, no longer will allow printing...

Under the Printer Settings function, select the Page Setup option on the left hand navigation...

When running the Web Client with Workflows enabled, NiceLabel LMS must hold an approved version of the label design specified...

NiceLabel creates .dvv files to store variable information. A shared counter or serial number provides a good example. However, when securing the...

When a label prints without incorporating the data from a drop-file, the likely cause is an issue with how the data is formatted.

When Efficient Business Integrators (EBI) orders a Label Cloud subscription license on your behalf, NiceLabel will send the access information direct to you. In order for EBI to properly configure your software to your specific requirements and equipment, you will need to add your EBI representative to the list of users.

This article explains how to generate a test print for a printer connected to NiceLabel Print Cloud using the NiceLabel Cloud API.

This article explains the NiceLabel Label Cloud API error message "Could not connect to Print service with id '[printer name]' for '[cloud account]'” and how to resolve the issue.

This article explains the Authentication Error message generated by NiceLabel Label Cloud and how to resolve it.

The "Requested content is invalid” error message in NiceLabel Label Cloud API is due to a FilePath error.

This article explains the cause of the NiceLabel Label Cloud API error message "Label not found (does not exist or not accessible)."

efore a printer can be accessed using NiceLabel's Print Cloud, it must first be connected to the cloud print server. The following instructions will guide you through the process of connecting your SATO printer to the NiceLabel Print Cloud.

This article describes the conditions under which NiceLabel generated the error message "Cannot import data due to invalid table filter definition..." as well as the solution.

The NiceLabel Automation error message "Font (font name) not available" appears when the software can't access the font even though the fonts are available to the user.

The error message "Retrieving the COM class factory..." appears when converting BarTender files to NiceLabel using NiceLabel Converter.

When printing labels, NiceLabel can generate the error message "A call to Windows API CreateDC failed". This article explores the causes and offers several workarounds.

Creating a NiceLabel Integration file while using the full-featured demo can cause an error message if you eventually buy an edition that doesn't include a feature you used in the demo.

It may be necessary to change the edition of NiceLabel that has been installed. This article will guide users through the process.

If NiceLabel sends a "Cannot open configuration" error message, the cause may be actions in the Automation Builder which are not supported by the license level.

NiceLabel users who need to rotate labels 180° in the printer driver settings are unable to do so. This article provides the solution.

The NiceLabel error message that begins with "An error occurred during data processing..." is pretty useful for troubleshooting if you know how to understand it. This article gives you that insight and shows you how to resolve the issue.

Duplicating a database table definition from one label to a new label may not be the time-saver it is expected if the new label's configuration doesn't match the original's. This article explains what to do if a table filter fails to work.

NiceLabel products cannot launch if the user does not have valid credentials for the NiceLabel Proxy Server.

Windows cannot start NiceLabel Automation Service 2019 if NiceLabel Proxy Services does not launch.

As business circumstances change, it may become an operational necessity to add more printers to a NiceLabel license. This article will guide you through the process of upgrading an existing NiceLabel license to work with more printers.

When printing to a remote IoT printer, NiceLabel experienced an error which lead to a message reading: "error from returned HTTP status: 404 Resource Not Found ..." The error occurred because the printer's URL was improperly entered during setup.

On a network with multiple workstations and printers, it is possible for NiceLabel software to misidentify a previously known printer as an entirely new printer. This can create a situation where NiceLabel believes you have more printer seats than allowed under the license.

NiceLabel identifies printers based on their hard-coded model name and their network location or by the computer and port it is directly plugged into.

When sending a label print job, NiceLabel pulls printer names from a database. If there is no value in the printer name field, the print job will fail.

Printing a label using an imported NiceLabel solution can prompt a "Call to Windows API failed" message if the print drivers on the current machine do not match those used on the workstation where the label was created.

When opening a saved label design, NiceLabel will search the computer and attached printer to make sure that the fonts used in the design are available. If the fonts are missing, it will attempt to find a substitute and will alert the user to this.

In order for SAP to connect to NiceLabel's cloud trigger service, NiceLabel Automation Service 10 must be running or it will issue the error message, "Could not connect to CloudTrigger service..."

After you install NiceLabel Designer and set up NiceLabel Cloud or NiceLabel LMS, you will want to test the connection between the application and those services so you can be certain that they will function properly.

When a mathematical function needs to be executed on a variable, Python scripts will not perform. This is because Python stores variables as text within its scripts. However, VBScripts will execute the operation reliably.

Embedding a link in an image allows you to directly open a website by clicking on the image while running the form in NiceLabel.

Microsoft's Web Services for Devices (WSD) makes it easy to connect to web printers. However, NiceLabel treats each connection between a workstation and a printer as a unique printer, consuming a license for each connection.

Internal variables allow you access to internal systems within NiceLabel LMS/Cloud workstation details and file paths. While both programs allow the use of internal variables, they each utilize different sets of these variables.

A NiceLabel automation file created at at a higher product level of the program cannot be opened when accessed by a lower level version of the software.

Consolidating NiceLabel licenses simplifies maintaining control of multiple printer licenses when making upgrades or other changes.

There are a number of reason why a NiceLabel Web Client Application fails to load. This article cites the most common ones as well as the different solutions needed to resolve the situation.

If a watch folder is outside the domain, NiceLabel Automation won't read the folder and therefore will not be able to trigger the programmed action. You will need to add the service and/or provide proper permissions in order for the automation to run properly.

It is best practice to save a new label file as if it were being printed. However, custom paper sizes are unavailable on most document drivers. Fortunately, there are two simple ways to work around this limitation.

As if the twice yearly time change to or from Daylight Savings wasn't annoying enough, the timestamp on printed labels can not make the change - despite being correct in print preview. The issue lies in the printer's real time clock (RTC).