1. Home
  2. Labeling Software
  3. CODESOFT
  4. CODESOFT Instructions
  5. Creating Print Job Start and End Labels – CODESOFT Instruction Article

Creating Print Job Start and End Labels – CODESOFT Instruction Article

Summary

This Instruction Article explains how to configure label designs to print a start and end label for each print run using the Layers feature in CODESOFT.

Instructions

  1. Start CODESOFT and open the label design file that requires a start and end label
  2. Select View > Layers to get the Layer window to pop up
  3. Design Start label:
    • Select the “First label of the printjob” button (eye icon and blank page preview appears on top screen segment)
    • Select the Eye icon (this causes CODESOFT to show the layout for the Start label which, when first creating it, should be blank)
    • Move Layer window out of the way and use CODESOFT to design Start label
  4. Design End label:
    • Select the “Last label of the printjob” button (eye icon and blank page preview appears on bottom screen segment)
    • Select the Eye icon (this causes CODESOFT to show the layout for the End label which, when first creating it, should be blank)
    • Use CODESOFT to design End label
  5. Save label design
  6. Test print

 Additional Comments

Sample CODESOFT v2014 label attached.

Updated on December 4, 2017

Article Attachments

Was this article helpful?

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
Contact Support