Add a Workstation to License Server – CODESOFT, LABELVIEW, and LABEL MATRIX Instructions

Target Audience: IT Manager
Article #: 5409

Summary

This Instruction Article explains how to add a client TEKLYNX label software license workstation to a network license server (using the Network Utilities application) for CODESOFT, LABELVIEW, or LABEL MATRIX. This is often done for new workstations, workstation upgrades, or reinstalling software on a PC workstation.

Preparation

• Make a note of the full name and location of the server hosting the TEKLYNX license server.
• Temporarily suspend or remove local firewall and/or PC protection software.

Instructions

Step 1 – Run the TEKLYNX Network Administration application.

NOTE: If the demo period for the software has ended and there is no valid license in place, follow the “Outside CODESOFT” method in the tab, below.

Step 2 – Check the box labeled ‘Use network license’ (for LABEL MATRIX, select Setup and Network tab)

Step 3 – Enter the server location and select OK

Step 4 – Start/Restart TEKLYNX label design software (i.e. CODESOFT, LABELVIEW, or LABEL MATRIX)

Additional Comments

Tested Using: CODESOFT 2018 on Windows 10

If you need further assistance, please contact us.