“Services The Label Archive Server service on LABELARCHIVE started and then stopped.” – LABEL ARCHIVE Error Message
This message appeared after trying to manually restart the Label Archive Server.
LABEL ARCHIVE Problems
-
-
Failure to Enable the ‘Tracing’ Feature – LABEL ARCHIVE Problem
When this feature is enabled, the 'Tracing' feature need a path to store the log file. Once the path is entered... -
Unable to Print to Image – LABELVIEW Problem
LABELVIEW 8.6 must be fully licensed to use the 'print to image' option... -
Unable to Check In Label as Draft – LABEL ARCHIVE Problem
There is a configuration settings option that needs to be enabled in LABEL ARCHIVE... -
Unable to Delete Existing Documents – LABEL ARCHIVE Problem
User will need to access LABEL ARCHIVE Server Administration to delete documents... -
Label Archive Server Service will not Start – LABEL ARCHIVE Problem
After installing LABEL ARCHIVE server and client on the server, it is discovered that both Label Archive Server and TkxSvr Servers services are not running. -
Label Does Not Appear in CODESOFT After Checkout – LABEL ARCHIVE Problem
Despite both LABEL ARCHIVE and CODESOFT working properly, a label checked out from the former does not appear in the latter. -
CODESOFT Freezes During Label Check-In – Label Archive Problem
Working within Label Archive, CODESOFT freezes during label check in despite having worked normally until that point. The issue turns out to be caused by a specific combination of older TEKLYNX software and a change in the monitors on the workstation.