CODESOFT Problems - Print Label Does Not Print As Expected (Orientation, Data Missing/Wrong, etc.)

If the data source is configured as a variable and the data source properties contain 11 digits but the field does not display as a barcode, then the field may not be created as a barcode...

Each variable field in CODESOFT has a maximum character length dictated by the output setting set by the user...

A label is sent to the printer for printing that prints data from the printer's RTC (Real Time Clock). ...

The orientation of the width and height of the label is not the same as orientation of the top and side of the screen. This can be corrected by...

Printer settings stored in the printer can be ignored and overwritten after running a print job from a different label and/or a different computer. This can happen when the label...

The page setting in the label properties may be the cause. CODESOFT allows user to define the page size to be smaller than the label size. It does give a small warning...

CODESOFT Export Label Image feature creates an image file that shows the rendering of the label, as it looked on the screen, at the time the file was saved. Most the major...

This problem is most likely caused by CODESOFT configuration. Specifically, Printing Format. If the Printing Format is set to Direct, CODESOFT will print a single label...

Images and text (using graphic images for fonts instead of printer resident fonts) can disappear from the label when a Zebra printer is setup as...

When changing or upgrading printers or PCs, users may accidentally or even temporarily switch from the TEKLYNX embedded drivers to a Windows driver...

The function of GridField is to take a large set of organized data from a particular data source (database or table lookup) and populate it on a....

An upgrade to CODESOFT, including print drivers, resulted in labels missing information when they were printed out. The culprit was the print drivers